你好,歡迎光臨濟南誠德包裝制作有限公司網站!

全國服務熱線:

0531-88606457

18764166456

內頁輪播
內頁輪播
內頁輪播

產品中心

  1. 方便袋
  2. 連卷袋/撕拉袋/拉鏈袋
  3. OPP塑料袋
  4. 平口袋/直立袋
  5. 手工異形袋/縮口塑料袋
  6. 扣手袋/手挽袋/服裝袋
  7. 罩衣袋
  8. 氣墊膜袋
  9. 塑料薄膜
  10. 抗靜電塑料袋
咨詢熱線:

0531-86954186

當前位置:首頁>新聞資訊 >
氣泡袋是怎么加工出來的?
發布于:2023/02/12
氣泡袋是用于包裝填充的一種防壓防潮防震的化工產品。具有良好的減震性、抗沖擊性、熱合性、無毒、無味、防潮、耐腐蝕、透明度好等優點。濟南氣泡袋是怎么加工出來的?
Bubble bag is a kind of chemical product used for packing and filling, which is pressure-proof, moisture-proof and shock-proof. It has the advantages of good shock absorption, impact resistance, heat sealing, non-toxic, tasteless, moisture-proof, corrosion resistance and good transparency. How is Jinan bubble bag processed?
1.氣泡袋的模具制作及加工:根據要求或樣品規格,首先制作好吸塑模具,一般條件下,都是利用石膏制作吸塑包裝模具,但也有用木雕及金屬雕刻的產品作模具,石膏模具制作好后。
1. Mold making and processing of bubble bag: according to the requirements or sample specifications, first make the blister mold. Generally, gypsum is used to make the blister packaging mold, but wood carving and metal carving products are also used as the mold. After the gypsum mold is made.
2.模具處理干燥完全后,將模具裝入真空室上層鐵板上,然后根據模具大小,將塑料片載成適用規格尺寸,然后將此片材放入加熱木柜內,使其完全固定好,再將木柜連同塑料片材置恒溫爐上進行軟化處理。
2. After the mold is completely dried, put the mold on the iron plate on the upper layer of the vacuum chamber, and then load the plastic sheet into the applicable specifications according to the size of the mold, and then put the sheet into the heating wood cabinet to completely fix it, and then place the wood cabinet and plastic sheet on the thermostatic furnace for softening treatment.
濟南氣泡袋
3.吸塑包裝整理;將生產出來的產品進行修邊整理即為成品產品,再經包裝后即可出售。
3. Blister packaging and finishing; The finished products are finished products after trimming and finishing, and can be sold after packaging.
4.將軟化處理好的塑料片連同木柜,置于真空室中,開動吸氣開關,將真空室內空氣吸抽干凈,待塑料片冷卻后,即得到與氣泡袋模具相同的凹型包裝或工藝模具。
4. Place the softened plastic sheet together with the wooden cabinet in the vacuum chamber, turn on the suction switch, and suck the air in the vacuum chamber clean. After the plastic sheet cools down, you can get the same concave packaging or process mold as the bubble bag mold.
氣泡袋的加工生產工藝主要是上面給大家分享的這些,現在大家都應該對氣泡袋了解了吧,大家需要氣泡袋的話,都可以聯系我們http://www.skmok.com!
The processing and production process of bubble bags are mainly those shared above. Now you should know about bubble bags. If you need bubble bags, you can contact us http://www.skmok.com !
上一篇:塑料袋在生活中的10種用途
下一篇:自封袋手動封口的小妙招
相關產品

抗靜電塑料袋

抗靜電塑料袋

抗靜電塑料袋

塑料薄膜

相關新聞
復合包裝袋組合標準的關鍵點
自封袋手動封口的小妙招
氣泡袋是怎么加工出來的?
塑料袋在生活中的10種用途
印刷膠帶脫膠的原因及解決辦法
復合袋熱封不良的表現及其原因
自封袋在使用過程中要注意的6個事項
氣泡袋的儲存方法